CF-80 2.4GHz Guitar and Bass Wireless System
Checkout with total confidence.
Want a simple 2.4GHz wireless system for guitar and bass?
The CF-80 is CFG’s everyday 2.4GHz wireless guitar and bass system, built for players who want clean cable-free playing without overthinking the setup.
Plug the transmitter into your instrument, plug the receiver into your amp, pedalboard, modeler, or audio interface, pair the units, and play. It is a practical fit for home practice, jams, rehearsals, church sets, and smaller gigs.
Clean 16-bit/48kHz audio
Designed for a clear, natural guitar and bass signal with less than 0.02% distortion.
Under 4ms latency
Fast enough to feel natural for normal playing, practice, rehearsals, and smaller stages.
Up to 8 hours
Rechargeable transmitter and receiver with a Y-split USB cable included.
Want to hear the CF-80 in action?
These videos show the CF-80 in real playing situations, including a product overview, cable comparison, bass demo, and a TV segment.
CF-80 product overview
A quick look at the CF-80 wireless system and how it works for cable-free playing.
CF-80 vs cable
Hear the CF-80 compared against a standard guitar cable.
CF-80 with 5-string bass
A bass demo for players who want to hear how the CF-80 handles low-end playing.
As seen on Fox Nashville
A TV demo segment featuring CFG wireless guitar gear.
What does the CF-80 give you?
The CF-80 keeps the feature set simple: 2.4GHz digital wireless, low latency, rechargeable units, rotating plugs, and enough range for everyday playing.
Wireless & Audio
- 2.4GHz ISM digital wireless transmission
- 48kHz/16-bit sampling rate
- Frequency response: 10Hz-22kHz
- Distortion: less than 0.02%
- Latency: under 4ms
Range & Channels
- Open-air range: up to 100ft / 30m
- Indoor range: up to 50ft / 15m, depending on the environment
- Supports up to 4 sets at the same time
- Use separate channels when running multiple systems
Power & Charging
- Battery life: up to 8 hours per charge
- Y-split USB charging cable included
- Charge transmitter and receiver together
- Use only a 5V/5W/1A charger
Fit & Setup
- 220° rotating plug design
- Fits most electric guitars and basses
- Simple setup: plug in, power on, pair, and play
- Good for pedalboards, amps, modelers, and audio interfaces
Compatibility
- Works with guitar and bass
- Works with many acoustic-electric instruments
- Works with many keyboards and e-drums using a standard mono TS output
- Made for instrument-level 1/4 inch connections
Best Use
- Home practice
- Jam sessions
- Rehearsals
- Church sets
- Smaller gigs and everyday playing
What instruments and gear can CF-80 work with?
The CF-80 is made for guitar and bass first, but it can also work with other gear that uses a standard mono TS 1/4 inch connection.
This is for instrument-level connections. Do not use the CF-80 as a speaker cable replacement between an amp head and a speaker cabinet. That is a different kind of signal, and your gear will not enjoy that adventure.
Which CFG wireless system fits your setup?
CF-80 is the everyday 2.4GHz value pick. SonikSphere is the 5.8GHz option with 24-bit/48kHz audio. UHF NEXUS is the UHF option for busier stages, more distance, and fast guitar swaps.
| Feature | UHF NEXUS | SonikSphere 5.8GHz | CF-80 2.4GHz |
|---|---|---|---|
| Wireless lane | UHF 657-663MHz | 5.8GHz | 2.4GHz |
| Latency | <2ms | <4ms | <4ms |
| Audio | 24-bit/48kHz | 24-bit/48kHz | 16-bit/48kHz |
| Channels | 7 color-coded channels | 6 manual channel banks | 4 channels |
| Open range | Up to 165ft / 50m | Up to 100ft / 30m | Up to 100ft / 30m |
| Battery | Up to 6h | Up to 8h | Up to 8h |
| Good for fast guitar swaps | Yes | No, one receiver pairs with one transmitter at a time | No |
| Best for | Busier stages, UHF setups, and fast instrument changes | Players who want 5.8GHz wireless with 24-bit audio | Everyday playing, home practice, jams, and value seekers |
UHF NEXUS
- Band: UHF 657-663MHz
- Latency: <2ms
- Audio: 24-bit/48kHz
- Channels: 7 color-coded channels
- Range: Up to 165ft / 50m
- Battery: Up to 6h
- Fast guitar swaps: Yes
- Best for: Busier stages, UHF setups, and fast instrument changes
SonikSphere 5.8GHz
- Band: 5.8GHz
- Latency: <4ms
- Audio: 24-bit/48kHz
- Channels: 6 manual channel banks
- Range: Up to 100ft / 30m
- Battery: Up to 8h
- Fast guitar swaps: No, one receiver pairs with one transmitter at a time
- Best for: Players who want 5.8GHz wireless with 24-bit audio
CF-80 2.4GHz
- Band: 2.4GHz
- Latency: <4ms
- Audio: 16-bit/48kHz
- Channels: 4 channels
- Range: Up to 100ft / 30m
- Battery: Up to 8h
- Fast guitar swaps: No
- Best for: Everyday playing, home practice, jams, and value seekers
What charger should I use with CF-80?
Use only a 5V/5W/1A charger with the CF-80.
Higher voltage or higher wattage chargers may damage the unit and void the warranty. The included Y-split USB cable lets you charge the transmitter and receiver together, but the wall charger still needs to match the correct rating.
Simple rule: old-school low-power USB charger, yes. Fast charger, power brick, turbo charger, or mystery drawer monster, no thanks.
What comes in the CF-80 box?
The CF-80 full system includes the transmitter, receiver, charging cable, and owner’s manual.
- 1 CF-80 transmitter: plugs into your guitar, bass, or compatible mono TS instrument output.
- 1 CF-80 receiver: plugs into your amp, pedalboard, modeler, audio interface, or compatible instrument-level input.
- 1 Y-split USB charging cable: charges both units from one suitable USB charger.
- 1 owner’s manual: setup, pairing, channel switching, and charging guidance.
Need help pairing or switching channels?
These quick CF-80 setup videos show how to select a different channel and how to pair the receiver with the transmitter.
How to select a different channel
Use this when setting up multiple CF-80 systems or trying a cleaner channel in a busy room.
How to pair the receiver with the transmitter
Use this if the transmitter and receiver are not connecting properly, or if you need to pair the system again.
CF-80 FAQ
Does the CF-80 work with bass?
Yes. The CF-80 is made for both guitar and bass, with a wide 10Hz-22kHz frequency response that helps keep low-end playing clear and natural. It also works with many other instruments that use a standard 1/4 inch mono TS output.
Will I hear latency or delay while playing?
The CF-80 has under 4ms latency, so it feels immediate for normal playing, practice, rehearsals, church sets, and smaller gigs.
Can I use the CF-80 with pedals, modelers, or an audio interface?
Yes. Plug the transmitter into your guitar or bass, then plug the receiver into your amp, pedalboard input, modeler, mixer, or audio interface. If you use pedals, the CF-80 usually goes where your regular guitar cable would go.
Does the CF-80 work with active pickups or piezo systems?
Usually, yes. Most active guitars and basses work fine. If your instrument has very hot active electronics, piezo circuitry, or a tight/recessed jack that causes noise or poor fit, use the Air-Pocket Transmitter Holster to move the transmitter away from the instrument body.
Can multiple CF-80 systems be used at the same time?
Yes. The CF-80 supports up to 4 sets at the same time. For best results, put each system on a different channel and keep the units a few feet apart when possible, especially in rooms with Wi-Fi and other wireless gear nearby.
How long does the battery last?
The CF-80 runs up to 8 hours per charge and includes a Y-split USB cable so you can charge the transmitter and receiver together.
What charger should I use?
Use only a 5V/5W/1A USB charger. Higher-voltage or high-wattage fast chargers can damage the battery and may void the warranty.
Should I choose CF-80, SonikSphere, or UHF NEXUS?
Choose CF-80 if you want the best-value everyday wireless system for home, practice, jams, and smaller gigs. Choose SonikSphere if you want 5.8GHz wireless with 24-bit/48kHz audio. Choose UHF NEXUS if you play busier stages and want stronger UHF stage performance.
Want a simple 2.4GHz wireless system for guitar and bass?
The CF-80 is CFG’s everyday 2.4GHz wireless guitar and bass system, built for players who want clean cable-free playing without overthinking the setup.
Plug the transmitter into your instrument, plug the receiver into your amp, pedalboard, modeler, or audio interface, pair the units, and play. It is a practical fit for home practice, jams, rehearsals, church sets, and smaller gigs.
Clean 16-bit/48kHz audio
Designed for a clear, natural guitar and bass signal with less than 0.02% distortion.
Under 4ms latency
Fast enough to feel natural for normal playing, practice, rehearsals, and smaller stages.
Up to 8 hours
Rechargeable transmitter and receiver with a Y-split USB cable included.
Want to hear the CF-80 in action?
These videos show the CF-80 in real playing situations, including a product overview, cable comparison, bass demo, and a TV segment.
CF-80 product overview
A quick look at the CF-80 wireless system and how it works for cable-free playing.
CF-80 vs cable
Hear the CF-80 compared against a standard guitar cable.
CF-80 with 5-string bass
A bass demo for players who want to hear how the CF-80 handles low-end playing.
As seen on Fox Nashville
A TV demo segment featuring CFG wireless guitar gear.
What does the CF-80 give you?
The CF-80 keeps the feature set simple: 2.4GHz digital wireless, low latency, rechargeable units, rotating plugs, and enough range for everyday playing.
Wireless & Audio
- 2.4GHz ISM digital wireless transmission
- 48kHz/16-bit sampling rate
- Frequency response: 10Hz-22kHz
- Distortion: less than 0.02%
- Latency: under 4ms
Range & Channels
- Open-air range: up to 100ft / 30m
- Indoor range: up to 50ft / 15m, depending on the environment
- Supports up to 4 sets at the same time
- Use separate channels when running multiple systems
Power & Charging
- Battery life: up to 8 hours per charge
- Y-split USB charging cable included
- Charge transmitter and receiver together
- Use only a 5V/5W/1A charger
Fit & Setup
- 220° rotating plug design
- Fits most electric guitars and basses
- Simple setup: plug in, power on, pair, and play
- Good for pedalboards, amps, modelers, and audio interfaces
Compatibility
- Works with guitar and bass
- Works with many acoustic-electric instruments
- Works with many keyboards and e-drums using a standard mono TS output
- Made for instrument-level 1/4 inch connections
Best Use
- Home practice
- Jam sessions
- Rehearsals
- Church sets
- Smaller gigs and everyday playing
What instruments and gear can CF-80 work with?
The CF-80 is made for guitar and bass first, but it can also work with other gear that uses a standard mono TS 1/4 inch connection.
This is for instrument-level connections. Do not use the CF-80 as a speaker cable replacement between an amp head and a speaker cabinet. That is a different kind of signal, and your gear will not enjoy that adventure.
Which CFG wireless system fits your setup?
CF-80 is the everyday 2.4GHz value pick. SonikSphere is the 5.8GHz option with 24-bit/48kHz audio. UHF NEXUS is the UHF option for busier stages, more distance, and fast guitar swaps.
| Feature | UHF NEXUS | SonikSphere 5.8GHz | CF-80 2.4GHz |
|---|---|---|---|
| Wireless lane | UHF 657-663MHz | 5.8GHz | 2.4GHz |
| Latency | <2ms | <4ms | <4ms |
| Audio | 24-bit/48kHz | 24-bit/48kHz | 16-bit/48kHz |
| Channels | 7 color-coded channels | 6 manual channel banks | 4 channels |
| Open range | Up to 165ft / 50m | Up to 100ft / 30m | Up to 100ft / 30m |
| Battery | Up to 6h | Up to 8h | Up to 8h |
| Good for fast guitar swaps | Yes | No, one receiver pairs with one transmitter at a time | No |
| Best for | Busier stages, UHF setups, and fast instrument changes | Players who want 5.8GHz wireless with 24-bit audio | Everyday playing, home practice, jams, and value seekers |
UHF NEXUS
- Band: UHF 657-663MHz
- Latency: <2ms
- Audio: 24-bit/48kHz
- Channels: 7 color-coded channels
- Range: Up to 165ft / 50m
- Battery: Up to 6h
- Fast guitar swaps: Yes
- Best for: Busier stages, UHF setups, and fast instrument changes
SonikSphere 5.8GHz
- Band: 5.8GHz
- Latency: <4ms
- Audio: 24-bit/48kHz
- Channels: 6 manual channel banks
- Range: Up to 100ft / 30m
- Battery: Up to 8h
- Fast guitar swaps: No, one receiver pairs with one transmitter at a time
- Best for: Players who want 5.8GHz wireless with 24-bit audio
CF-80 2.4GHz
- Band: 2.4GHz
- Latency: <4ms
- Audio: 16-bit/48kHz
- Channels: 4 channels
- Range: Up to 100ft / 30m
- Battery: Up to 8h
- Fast guitar swaps: No
- Best for: Everyday playing, home practice, jams, and value seekers
What charger should I use with CF-80?
Use only a 5V/5W/1A charger with the CF-80.
Higher voltage or higher wattage chargers may damage the unit and void the warranty. The included Y-split USB cable lets you charge the transmitter and receiver together, but the wall charger still needs to match the correct rating.
Simple rule: old-school low-power USB charger, yes. Fast charger, power brick, turbo charger, or mystery drawer monster, no thanks.
What comes in the CF-80 box?
The CF-80 full system includes the transmitter, receiver, charging cable, and owner’s manual.
- 1 CF-80 transmitter: plugs into your guitar, bass, or compatible mono TS instrument output.
- 1 CF-80 receiver: plugs into your amp, pedalboard, modeler, audio interface, or compatible instrument-level input.
- 1 Y-split USB charging cable: charges both units from one suitable USB charger.
- 1 owner’s manual: setup, pairing, channel switching, and charging guidance.
Need help pairing or switching channels?
These quick CF-80 setup videos show how to select a different channel and how to pair the receiver with the transmitter.
How to select a different channel
Use this when setting up multiple CF-80 systems or trying a cleaner channel in a busy room.
How to pair the receiver with the transmitter
Use this if the transmitter and receiver are not connecting properly, or if you need to pair the system again.
CF-80 FAQ
Does the CF-80 work with bass?
Yes. The CF-80 is made for both guitar and bass, with a wide 10Hz-22kHz frequency response that helps keep low-end playing clear and natural. It also works with many other instruments that use a standard 1/4 inch mono TS output.
Will I hear latency or delay while playing?
The CF-80 has under 4ms latency, so it feels immediate for normal playing, practice, rehearsals, church sets, and smaller gigs.
Can I use the CF-80 with pedals, modelers, or an audio interface?
Yes. Plug the transmitter into your guitar or bass, then plug the receiver into your amp, pedalboard input, modeler, mixer, or audio interface. If you use pedals, the CF-80 usually goes where your regular guitar cable would go.
Does the CF-80 work with active pickups or piezo systems?
Usually, yes. Most active guitars and basses work fine. If your instrument has very hot active electronics, piezo circuitry, or a tight/recessed jack that causes noise or poor fit, use the Air-Pocket Transmitter Holster to move the transmitter away from the instrument body.
Can multiple CF-80 systems be used at the same time?
Yes. The CF-80 supports up to 4 sets at the same time. For best results, put each system on a different channel and keep the units a few feet apart when possible, especially in rooms with Wi-Fi and other wireless gear nearby.
How long does the battery last?
The CF-80 runs up to 8 hours per charge and includes a Y-split USB cable so you can charge the transmitter and receiver together.
What charger should I use?
Use only a 5V/5W/1A USB charger. Higher-voltage or high-wattage fast chargers can damage the battery and may void the warranty.
Should I choose CF-80, SonikSphere, or UHF NEXUS?
Choose CF-80 if you want the best-value everyday wireless system for home, practice, jams, and smaller gigs. Choose SonikSphere if you want 5.8GHz wireless with 24-bit/48kHz audio. Choose UHF NEXUS if you play busier stages and want stronger UHF stage performance.
Bundle up & Save!
Get 5% Off by adding 1 or more items!
Total price:
Watch the CF-80 2.4GHz in Action
2.4GHz that’s built for the grind, not the gimmicks.
Recommended for you
People who bought this product also liked: