Reason 1: Built-in -10 dB PAD
Helps prevent input overload from hot pickups.
Yes. SonikSphere NEO is CFG’s second-generation 5.8 GHz wireless system for guitarists and bassists who want dependable performance, over 10 hours of battery life, under 2.5 ms latency, and 24-bit / 48 kHz audio.
It runs outside the crowded 2.4 GHz band and adds 6 color-coded channels, battery-level bars on both units, and a built-in -10 dB PAD for active, piezo, and other high-output instruments.
Plug the transmitter into your instrument and the receiver into your amp or pedalboard, choose a channel, and play without the cable under your feet.

SonikSphere NEO is built for players who want dependable 5.8 GHz wireless, long battery life, very low latency, and clean 24-bit / 48 kHz audio.
Steve Stine of GuitarZoom shares three reasons he chose CFG's 5.8 GHz wireless guitar system, from handling hot pickups to easy setup and cable-like tone.
Helps prevent input overload from hot pickups.
Plug in, play, and switch channels with one button.
Hear Steve compare the NEO directly with a cable.
SonikSphere NEO uses 24-bit / 48 kHz digital audio with a 10 Hz-22 kHz frequency response, designed to keep your guitar or bass sounding natural while you play wirelessly.
The frequency-response comparison and cable-vs-NEO video below let you see and hear the difference for yourself.

NEO gives you 6 color-coded wireless channels plus a built-in -10dB PAD for hotter active, piezo, or high-output instruments.
Press the Action Oval button on the transmitter to cycle through red, green, blue, yellow, purple, and cyan. Once paired, the receiver follows the transmitter’s selected channel.
When using multiple NEO systems in the same room, give each pair a different channel.

Start with the PAD off. Turn it on if an active, piezo, or high-output instrument sounds overloaded, harsh, or digitally distorted.
The PAD lowers the transmitter input level by 10dB before the signal is processed. It is not a tone control and does not boost quiet instruments.
Yes. SonikSphere NEO works with guitars, basses, and other gear using standard 1/4-inch mono instrument-level connections. Plug the black transmitter into your instrument and the silver receiver into your amp, pedalboard, modeler, or audio interface instrument input.

Each SonikSphere NEO system includes everything needed to connect one instrument wirelessly to an amp, pedalboard, modeler, or audio interface instrument input.

⬇️ Download the SonikSphere NEO Owner’s Manual (PDF) ⬇️
Use a standard 5V / 1A USB power source rated at no more than 5W. The included USB-A to dual USB-C cable charges the transmitter and receiver at the same time.
⚠️ Do not use high-wattage fast chargers. Using an unsupported charger may damage the transmitter or receiver and void the warranty.
Choose SonikSphere NEO if you want longer battery life, very low latency, and built-in input control for hot active or piezo instruments. Choose UHF NEXUS for stage-focused UHF operation, longer open-air range, and fast instrument swaps. Original SonikSphere is CFG’s straightforward 5.8GHz 24-bit / 48kHz option, while CF-80 is the budget-friendly 2.4GHz choice.
| Feature | CF-80 | Original SonikSphere | SonikSphere NEO | UHF NEXUS |
|---|---|---|---|---|
| Best for | Budget-friendly everyday wireless for practice, rehearsals, and general use | Straightforward 5.8GHz wireless with 24-bit / 48kHz audio | Longer battery life, very low latency, and hot active or piezo instruments needing input-level control | Live gigs, busy wireless environments, longer open-air range, and fast instrument swaps |
| Wireless band | 2.4GHz | 5.8GHz | 5.8GHz | UHF 657-663MHz |
| Audio | 16-bit/48kHz | 24-bit/48kHz | 24-bit/48kHz | 24-bit/48kHz |
| Latency | Under 4ms | Under 4ms | Under 2.5ms | Under 2ms |
| Battery life | Up to 8 hours | Up to 8 hours | Over 10 hours | Up to 6 hours |
| Open-space range | Up to 100 ft | Up to 100 ft | Up to 100 ft | Up to 165 ft |
| Channels | 4 banks | 6 channels | 6 color-coded channels | 7 color-coded channels |
| Input control for hot active or piezo signals | No dedicated PAD | No dedicated PAD | Built-in -10dB PAD | No dedicated PAD |
| Fast guitar swaps | New pairing may be required | New pairing may be required | One transmitter pairs with one receiver at a time | Yes. Multiple transmitters can be prepared for one receiver, with only one transmitter powered on at a time |
The upgraded 5.8GHz choice
The stage-focused UHF choice
The original 5.8GHz choice
The everyday value choice
Need a hand? These short videos cover the three things NEO owners are most likely to need: changing channels, re-pairing the system, and using the -10dB PAD.
See how to move your NEO system to another color-coded channel.
Use this if the transmitter and receiver are no longer connecting properly.
See when the PAD can help with active, piezo, or other high-output instruments.
Yes. SonikSphere NEO works with electric guitars, electric basses, and acoustic-electric instruments that use a standard 1/4-inch mono instrument output.
Yes. It works with passive, active, magnetic, and piezo pickup systems. Use the built-in -10dB PAD if an active, piezo, or high-output instrument sounds overloaded or digitally distorted.
SonikSphere NEO operates at 5.725-5.825 GHz in the 5.8 GHz ISM band, keeping your instrument signal outside the crowded 2.4 GHz band used by many Wi-Fi, Bluetooth, and other everyday wireless devices. NEO also uses FHSS interference mitigation.
SonikSphere NEO has under 2.5 ms latency, designed to keep the response fast and natural while playing guitar or bass.
SonikSphere NEO uses 24-bit / 48 kHz digital audio with a 10 Hz-22 kHz frequency response, designed to keep your guitar or bass sounding natural while you play wirelessly. The frequency-response comparison and cable-vs-NEO video above let you hear the difference for yourself.
SonikSphere NEO provides over 10 hours of continuous use per charge. Battery bars on both the transmitter and receiver show the remaining charge.
SonikSphere NEO has a range of up to 100 ft / 30 m with clear line of sight.
Yes. Up to 6 NEO pairs can be used at the same time on separate color-coded channels. Give each pair its own channel.
Press the Action Oval button on the transmitter to select red, green, blue, yellow, purple, or cyan. Once paired, the receiver follows the transmitter’s selected channel.
Start with the PAD off. Turn it on if an active, piezo, or other high-output instrument sounds overloaded, harsh, or digitally distorted. The PAD lowers the transmitter input level by 10dB before processing. It is not a tone control and does not boost quiet instruments.
Connect the silver receiver to a guitar or bass amp input, pedalboard input, amp modeler input, or audio interface instrument input. Do not connect it to a speaker output, XLR microphone connection, stereo headphone output, or other non-instrument-level connection.
The 270-degree swivel plug fits most straight, side, angled, and many recessed guitar and bass jacks. Deeply recessed, crowded, or acoustic endpin jacks may need a short 1/4-inch TS extension cable or the CFG Air Pocket transmitter holster.
No. One SonikSphere NEO receiver pairs with one transmitter at a time. Re-pairing is required when switching to a different transmitter.
No. SonikSphere NEO is not cross-compatible with Original SonikSphere, CF-80, or UHF NEXUS. Use SonikSphere NEO transmitters and receivers with SonikSphere NEO components.
Use a standard 5V / 1A USB power source rated at no more than 5W. The included USB-A to dual USB-C cable can charge the transmitter and receiver at the same time. Do not use high-wattage fast chargers.
The box includes 1 black SonikSphere NEO transmitter, 1 silver receiver, 1 USB-A to dual USB-C charging cable, and 1 owner’s manual.
Re-pair the transmitter and receiver. Double-click the Action Oval button on both units to start the pairing process, then allow a few seconds for them to reconnect. The setup tutorial above shows the process step by step.
SonikSphere NEO includes CFG’s 2-year warranty.
Yes. SonikSphere NEO is CFG’s second-generation 5.8 GHz wireless system for guitarists and bassists who want dependable performance, over 10 hours of battery life, under 2.5 ms latency, and 24-bit / 48 kHz audio.
It runs outside the crowded 2.4 GHz band and adds 6 color-coded channels, battery-level bars on both units, and a built-in -10 dB PAD for active, piezo, and other high-output instruments.
Plug the transmitter into your instrument and the receiver into your amp or pedalboard, choose a channel, and play without the cable under your feet.

SonikSphere NEO is built for players who want dependable 5.8 GHz wireless, long battery life, very low latency, and clean 24-bit / 48 kHz audio.
Steve Stine of GuitarZoom shares three reasons he chose CFG's 5.8 GHz wireless guitar system, from handling hot pickups to easy setup and cable-like tone.
Helps prevent input overload from hot pickups.
Plug in, play, and switch channels with one button.
Hear Steve compare the NEO directly with a cable.
SonikSphere NEO uses 24-bit / 48 kHz digital audio with a 10 Hz-22 kHz frequency response, designed to keep your guitar or bass sounding natural while you play wirelessly.
The frequency-response comparison and cable-vs-NEO video below let you see and hear the difference for yourself.

NEO gives you 6 color-coded wireless channels plus a built-in -10dB PAD for hotter active, piezo, or high-output instruments.
Press the Action Oval button on the transmitter to cycle through red, green, blue, yellow, purple, and cyan. Once paired, the receiver follows the transmitter’s selected channel.
When using multiple NEO systems in the same room, give each pair a different channel.

Start with the PAD off. Turn it on if an active, piezo, or high-output instrument sounds overloaded, harsh, or digitally distorted.
The PAD lowers the transmitter input level by 10dB before the signal is processed. It is not a tone control and does not boost quiet instruments.
Yes. SonikSphere NEO works with guitars, basses, and other gear using standard 1/4-inch mono instrument-level connections. Plug the black transmitter into your instrument and the silver receiver into your amp, pedalboard, modeler, or audio interface instrument input.

Each SonikSphere NEO system includes everything needed to connect one instrument wirelessly to an amp, pedalboard, modeler, or audio interface instrument input.

⬇️ Download the SonikSphere NEO Owner’s Manual (PDF) ⬇️
Use a standard 5V / 1A USB power source rated at no more than 5W. The included USB-A to dual USB-C cable charges the transmitter and receiver at the same time.
⚠️ Do not use high-wattage fast chargers. Using an unsupported charger may damage the transmitter or receiver and void the warranty.
Choose SonikSphere NEO if you want longer battery life, very low latency, and built-in input control for hot active or piezo instruments. Choose UHF NEXUS for stage-focused UHF operation, longer open-air range, and fast instrument swaps. Original SonikSphere is CFG’s straightforward 5.8GHz 24-bit / 48kHz option, while CF-80 is the budget-friendly 2.4GHz choice.
| Feature | CF-80 | Original SonikSphere | SonikSphere NEO | UHF NEXUS |
|---|---|---|---|---|
| Best for | Budget-friendly everyday wireless for practice, rehearsals, and general use | Straightforward 5.8GHz wireless with 24-bit / 48kHz audio | Longer battery life, very low latency, and hot active or piezo instruments needing input-level control | Live gigs, busy wireless environments, longer open-air range, and fast instrument swaps |
| Wireless band | 2.4GHz | 5.8GHz | 5.8GHz | UHF 657-663MHz |
| Audio | 16-bit/48kHz | 24-bit/48kHz | 24-bit/48kHz | 24-bit/48kHz |
| Latency | Under 4ms | Under 4ms | Under 2.5ms | Under 2ms |
| Battery life | Up to 8 hours | Up to 8 hours | Over 10 hours | Up to 6 hours |
| Open-space range | Up to 100 ft | Up to 100 ft | Up to 100 ft | Up to 165 ft |
| Channels | 4 banks | 6 channels | 6 color-coded channels | 7 color-coded channels |
| Input control for hot active or piezo signals | No dedicated PAD | No dedicated PAD | Built-in -10dB PAD | No dedicated PAD |
| Fast guitar swaps | New pairing may be required | New pairing may be required | One transmitter pairs with one receiver at a time | Yes. Multiple transmitters can be prepared for one receiver, with only one transmitter powered on at a time |
The upgraded 5.8GHz choice
The stage-focused UHF choice
The original 5.8GHz choice
The everyday value choice
Need a hand? These short videos cover the three things NEO owners are most likely to need: changing channels, re-pairing the system, and using the -10dB PAD.
See how to move your NEO system to another color-coded channel.
Use this if the transmitter and receiver are no longer connecting properly.
See when the PAD can help with active, piezo, or other high-output instruments.
Yes. SonikSphere NEO works with electric guitars, electric basses, and acoustic-electric instruments that use a standard 1/4-inch mono instrument output.
Yes. It works with passive, active, magnetic, and piezo pickup systems. Use the built-in -10dB PAD if an active, piezo, or high-output instrument sounds overloaded or digitally distorted.
SonikSphere NEO operates at 5.725-5.825 GHz in the 5.8 GHz ISM band, keeping your instrument signal outside the crowded 2.4 GHz band used by many Wi-Fi, Bluetooth, and other everyday wireless devices. NEO also uses FHSS interference mitigation.
SonikSphere NEO has under 2.5 ms latency, designed to keep the response fast and natural while playing guitar or bass.
SonikSphere NEO uses 24-bit / 48 kHz digital audio with a 10 Hz-22 kHz frequency response, designed to keep your guitar or bass sounding natural while you play wirelessly. The frequency-response comparison and cable-vs-NEO video above let you hear the difference for yourself.
SonikSphere NEO provides over 10 hours of continuous use per charge. Battery bars on both the transmitter and receiver show the remaining charge.
SonikSphere NEO has a range of up to 100 ft / 30 m with clear line of sight.
Yes. Up to 6 NEO pairs can be used at the same time on separate color-coded channels. Give each pair its own channel.
Press the Action Oval button on the transmitter to select red, green, blue, yellow, purple, or cyan. Once paired, the receiver follows the transmitter’s selected channel.
Start with the PAD off. Turn it on if an active, piezo, or other high-output instrument sounds overloaded, harsh, or digitally distorted. The PAD lowers the transmitter input level by 10dB before processing. It is not a tone control and does not boost quiet instruments.
Connect the silver receiver to a guitar or bass amp input, pedalboard input, amp modeler input, or audio interface instrument input. Do not connect it to a speaker output, XLR microphone connection, stereo headphone output, or other non-instrument-level connection.
The 270-degree swivel plug fits most straight, side, angled, and many recessed guitar and bass jacks. Deeply recessed, crowded, or acoustic endpin jacks may need a short 1/4-inch TS extension cable or the CFG Air Pocket transmitter holster.
No. One SonikSphere NEO receiver pairs with one transmitter at a time. Re-pairing is required when switching to a different transmitter.
No. SonikSphere NEO is not cross-compatible with Original SonikSphere, CF-80, or UHF NEXUS. Use SonikSphere NEO transmitters and receivers with SonikSphere NEO components.
Use a standard 5V / 1A USB power source rated at no more than 5W. The included USB-A to dual USB-C cable can charge the transmitter and receiver at the same time. Do not use high-wattage fast chargers.
The box includes 1 black SonikSphere NEO transmitter, 1 silver receiver, 1 USB-A to dual USB-C charging cable, and 1 owner’s manual.
Re-pair the transmitter and receiver. Double-click the Action Oval button on both units to start the pairing process, then allow a few seconds for them to reconnect. The setup tutorial above shows the process step by step.
SonikSphere NEO includes CFG’s 2-year warranty.

People who bought this product also liked: