Before Gravity Gap
At maximum strap length, the instrument hangs low, but the padded section may no longer sit correctly across the shoulder.
Gravity Gap: Guitar Strap Extender and Headstock Tie
$11.99
Unit price
per
Only 999 left in stock
In stock
Checkout with total confidence.
What is the Gravity Gap strap extender?
Gravity Gap adds approximately 4 inches of practical reach between your strap and instrument.
It is especially useful for taller players and anyone who likes to wear a guitar or bass low. When a Zero-Gravity strap is adjusted to its longest setting, the padded section can sometimes move away from the shoulder, leaving the narrower webbing to carry the weight.
Install Gravity Gap at the front end of the strap to move the padded section back toward the shoulder, where it can provide the comfort and weight relief it was designed for.
Why add Gravity Gap to a Zero-Gravity strap?
It lets the instrument hang lower without allowing the padded shoulder section to slide too far out of position.
The extender adds reach at the instrument end of the strap. This gives low-slung players the extra distance they need while helping return the padded section to the correct shoulder position.
After Adding Gravity Gap
The extra reach lets the instrument stay low while helping the padded section return to the shoulder.
How do I install the Gravity Gap?
Connect Gravity Gap between the instrument’s front strap button and the front end of your strap.
Push the extender’s metal button through your strap hole, then place the hole at the other end of Gravity Gap over the instrument’s existing strap button. No tools are required.
1. Attach the Strap
Push the Gravity Gap metal button securely through the strap’s existing hole.
2. Attach It to the Instrument
Place the extender’s other hole over the instrument’s front strap button, then check that both connections are fully seated.
Watch How to Install Gravity Gap
This short demonstration shows where the extender connects and how it changes the position of the padded shoulder section.
Fit note: Designed for most standard guitar and bass strap buttons and strap holes. Fit may vary with oversized or non-standard hardware.
Gravity Gap Size and Materials
Dimensions
- Pin-to-hole length: 8 in / 20.5 cm
- Width: 0.9 in / 2.2 cm
- Adds approximately 4 inches of practical reach
Materials
- Premium microfiber PU
- Odorless material
- Double-layer construction
- Flexible and sturdy
Best For
- Taller players
- Low guitar or bass positions
- Straps that feel slightly too short
- Improved Zero-Gravity pad placement
Did you know Gravity Gap has a second use?
Use It as an Acoustic Guitar Headstock Strap Adapter
Gravity Gap can also provide a strap connection for acoustic guitars that do not have a front strap button near the neck joint.
Loop it around the headstock just behind the nut, then connect the guitar strap to its metal button. Make sure it sits flat and does not interfere with the strings, nut, or tuning hardware.
One small accessory, two useful ways to close the gap.
Gravity Gap FAQ
How much extra length does Gravity Gap add?
Gravity Gap measures 8 inches / 20.5 cm from its metal button to the strap hole and adds approximately 4 inches of practical strap reach once installed.
Where should I install Gravity Gap?
Install it at the front end of the strap, between the strap and the instrument’s front strap button. This placement helps move the padded shoulder section back into position.
Is Gravity Gap only for taller players?
No. It can help any player who needs extra strap reach, prefers a lower instrument position, or wants to change where the padded section rests on the shoulder.
Do I need tools to install it?
No. Gravity Gap attaches directly to the strap and instrument strap button without tools.
Will it fit every guitar or bass?
It is designed for most standard guitar and bass strap buttons and strap holes. Fit may vary with oversized, recessed, or non-standard hardware.
What is Gravity Gap made from?
It is made from premium odorless microfiber PU with flexible, sturdy, double-layer construction.
Can it be used as an acoustic headstock strap adapter?
Yes. Gravity Gap can be looped around the headstock behind the nut to provide a front strap connection for compatible acoustic guitars without a body-mounted front strap button.
What is the Gravity Gap strap extender?
Gravity Gap adds approximately 4 inches of practical reach between your strap and instrument.
It is especially useful for taller players and anyone who likes to wear a guitar or bass low. When a Zero-Gravity strap is adjusted to its longest setting, the padded section can sometimes move away from the shoulder, leaving the narrower webbing to carry the weight.
Install Gravity Gap at the front end of the strap to move the padded section back toward the shoulder, where it can provide the comfort and weight relief it was designed for.
Why add Gravity Gap to a Zero-Gravity strap?
It lets the instrument hang lower without allowing the padded shoulder section to slide too far out of position.
The extender adds reach at the instrument end of the strap. This gives low-slung players the extra distance they need while helping return the padded section to the correct shoulder position.
Before Gravity Gap
At maximum strap length, the instrument hangs low, but the padded section may no longer sit correctly across the shoulder.
After Adding Gravity Gap
The extra reach lets the instrument stay low while helping the padded section return to the shoulder.
How do I install the Gravity Gap?
Connect Gravity Gap between the instrument’s front strap button and the front end of your strap.
Push the extender’s metal button through your strap hole, then place the hole at the other end of Gravity Gap over the instrument’s existing strap button. No tools are required.
1. Attach the Strap
Push the Gravity Gap metal button securely through the strap’s existing hole.
2. Attach It to the Instrument
Place the extender’s other hole over the instrument’s front strap button, then check that both connections are fully seated.
Watch How to Install Gravity Gap
This short demonstration shows where the extender connects and how it changes the position of the padded shoulder section.
Fit note: Designed for most standard guitar and bass strap buttons and strap holes. Fit may vary with oversized or non-standard hardware.
Gravity Gap Size and Materials
Dimensions
- Pin-to-hole length: 8 in / 20.5 cm
- Width: 0.9 in / 2.2 cm
- Adds approximately 4 inches of practical reach
Materials
- Premium microfiber PU
- Odorless material
- Double-layer construction
- Flexible and sturdy
Best For
- Taller players
- Low guitar or bass positions
- Straps that feel slightly too short
- Improved Zero-Gravity pad placement
Did you know Gravity Gap has a second use?
Use It as an Acoustic Guitar Headstock Strap Adapter
Gravity Gap can also provide a strap connection for acoustic guitars that do not have a front strap button near the neck joint.
Loop it around the headstock just behind the nut, then connect the guitar strap to its metal button. Make sure it sits flat and does not interfere with the strings, nut, or tuning hardware.
One small accessory, two useful ways to close the gap.
Gravity Gap FAQ
How much extra length does Gravity Gap add?
Gravity Gap measures 8 inches / 20.5 cm from its metal button to the strap hole and adds approximately 4 inches of practical strap reach once installed.
Where should I install Gravity Gap?
Install it at the front end of the strap, between the strap and the instrument’s front strap button. This placement helps move the padded shoulder section back into position.
Is Gravity Gap only for taller players?
No. It can help any player who needs extra strap reach, prefers a lower instrument position, or wants to change where the padded section rests on the shoulder.
Do I need tools to install it?
No. Gravity Gap attaches directly to the strap and instrument strap button without tools.
Will it fit every guitar or bass?
It is designed for most standard guitar and bass strap buttons and strap holes. Fit may vary with oversized, recessed, or non-standard hardware.
What is Gravity Gap made from?
It is made from premium odorless microfiber PU with flexible, sturdy, double-layer construction.
Can it be used as an acoustic headstock strap adapter?
Yes. Gravity Gap can be looped around the headstock behind the nut to provide a front strap connection for compatible acoustic guitars without a body-mounted front strap button.
Recommended for you
People who bought this product also liked: