This is the accessory you've been waiting for!
In some cases, active or piezo pickups can produce some undesirable high-pitched noise when used with a Guitar Wireless System.
You can eliminate this interference by physically moving the transmitter further away from your guitar’s electronics with the AIR-POCKET Transmitter Holder!
- Allows you to attach your CF-80 and many more Guitar Wireless System's Transmitter to your guitar strap—distancing it from your instrument’s output jack
- 36 inches / 90 cm - ¼ inch / 6.35mm extension cable (included) connects the transmitter to the output of your guitar or bass.
- Protect your transmitter in the Air-Pocket's leather holster, instead of leaving it exposed at the end of your instrument.
Similarly, acoustic guitars with pickup systems that include an integrated microphone can create problems for the wireless system. Fix these with the AIR-POCKET!
The top hook+loop flap can be looped through your strap’s buckle to prevent slippage. Two hook+loop straps hold the AIR-POCKET secure against the guitar strap, and the cable extension goes through an opening at the unit’s lower end to ensure that the AIR-POCKET never gets disconnected!
how to use:
FAQ
You ask, we answer.
Does the CF-80 wireless system work with Bass as well as guitar?
Yes, it will work perfectly both with active and passive systems. If you get any feedback or noise using an active system we have the solution, it is the "Air-Pockect" transmitter holder, all you need to do is attach the transmitter to your strap, keeping it a bit further away from the guitar and noise is gone!
Turn on both the transmitter and the receiver. Press the pairing button of the receiver until the blue indicator flickers rapidly. Press the pairing button of the transmitter for about 2 seconds. When they're paired successfully, the blue indicators on both devices will give constant light.
The system devides the working frequency band into 4 channel banks so as to avoid mutual interference. Each pair occupies one channel bank while in use.
Each time you double click the transmitter's pairing button, the channel group will be switched once. At the same time, the yellow light indicates the current channel group by flashing times. (If the LED indicator for example, flashes once, it means the fisrt bank is chosen, if it flashes twicem the 2nd bank is chosen and so on).
If not in use for a long time, or switched off during low battery without charging it on time, The battry enters into protection mode, and you need to charge it fully to activate battery.
Yes, it will work beautifly. You can use it to mic your vocals, a harminica, and more!
You are welcome to return the products up to 30 days from arrival, as long as they are in their oroginal packaging, and in perfect condition. Returns are free of charge! For more info please visit our Returns Policy Page.